相關雜志相關協會相關書籍
熱門關鍵詞:干燥設備  閃蒸干燥機  噴霧干燥機  污泥干燥機  振動流化床  帶式干燥機  槳葉干燥機  盤式干燥機  振動篩  離心泵  分散機
您現在的位置:首頁 >> 泵閥設備 >> 化工泵

進口化工軸流泵(歐美進口十大品牌)

產品關鍵詞:進口化工軸流泵 進口化工軸流泵 進口化工軸流泵 進口化工軸流泵
  • 產品名稱:進口化工軸流泵(歐美進口十大品牌)
  • 產品編號:
  • 產品商標:GRIMM
  • 產品規格:空
  • 參考價格:面議
  • 更新時間:2020/1/2 11:53:53
  • 點擊次數:159次

英國GRIMM格林進口化工軸流泵 UK GRIMM Imported axial flow pump

進口化工軸流泵.jpg

英國GRIMM格林進口化工軸流泵概述 

          進口化工軸流泵是英國格林自行研制開發的新產品,按口徑分:250、300、350、450、500、600、700、800、900共9個型號,18個規格產品。可靠性好,維修方便,是專為氯堿、制鹽中蒸發循環工程的特點而專門設計的軸流泵。借鑒了行業內的成功技術,并融入自身的設計所長,經優化的傳動設計,運行振動小,噪音低,大幅提高了軸流泵的運行可靠性和平衡性,使維護周期和使用壽命大大增加。運行可靠性高,維護周期增加一倍以上,壽命增加20%。
          可輸送化學中性和腐蝕性,冷的或熱的,清潔的或污染的,懸浮液或有大量結晶顆粒的腐蝕性液體。

 

英國GRIMM格林進口化工軸流泵結構特點:
            參照升力線理論,吸取螺旋槳設計的經驗,發展了沿徑向變環量分布的軸流泵設計方法,并進行了廠內的模型試驗,與同類型軸流泵相比,重量輕,體積小,剛性好,效率高(與英國格林第一代化工軸流泵相比,效率提高10%以上,重量減輕30%以上)。自驅動端看,泵為逆時針旋轉。

英國GRIMM格林進口化工軸流泵設計特點: 
          進口化工軸流泵,采用懸臂式支撐型式,單級單吸軸流式葉輪,電機采用直聯或皮帶傳動。采用后開門的結構,使得在檢修或更換密封時,只要抽出轉動部分即可,而不需要拆卸管路,因此具有維修方便的特點。密封型式可采用雙端面機械密封或填料密封。泵體采用彎管式或蝸殼式結構,泵進出口口徑相同。軸承箱體帶有水冷腔,用以通冷卻水冷卻軸承。對于懸掛式結構或彈性基礎式的軸流泵為特殊設計。

英國GRIMM格林進口化工軸流泵技術參數: 

 

 

流       量:200~12000m3/h          
揚       程:2~12m
轉       速:580~1450r/min     
功       率:7.5~250KW
口       徑:250~900mm 
設計壓力:0.4MPa      
工作壓力:1.0MPa
工作溫度:-0~180℃

 

 

英國GRIMM格林進口化工軸流泵密封: 

密封腔處的徑向振擺小于0.5mm,保證了密封的可靠性和耐久性,延長了維修周期。可以安裝填料密封和單端或雙端機械密封,并可安裝動力密封以供特殊場合使用。

固定密封選用Viton等合成橡膠。

填料選用石棉、碳纖維、柔性石墨等優質耐腐減磨材料。

英國GRIMM格林進口化工軸流泵材質: 

         過流部件可用1Cr18Ni9,1Cr18Ni12Mo2Ti,1Cr18Ni12Mo3Ti,因科洛804等多種材質制造。輸送溫度為0~180℃的各種強腐蝕材質。

英國GRIMM格林進口化工軸流泵用途: 

            輸送低溫或高溫液體;中性或有腐蝕的液體;清潔的或內含固體顆粒的液體。

特別適用于:
1、化工和石油化學工業

2、煉油廠、造紙廠、紙漿業、煤化工、發電廠、制藥業、制糖業、煉鋼廠、水處理

3、涂裝行業(脫脂、磷化、電泳等工序)

UK GRIMM Imported axial flow pump summary:

        Imported chemical axial pump is a new product developed by Green in Britain. It is divided into 9 models and 18 specifications according to the caliber: 250, 300, 350, 450, 500, 600,, 700, 800, and 900. The utility model has the advantages of good reliability and convenient maintenance, and is an axial-flow pump specially designed for the characteristics of evaporation and circulation engineering in chlor alkali and salt making. Based on the success in the technology industry, and into the design director of itself, by driving the optimization design and operation of small vibration, low noise, greatly improves the reliability and balance of the axial flow pump, the maintenance period and the service life is greatly increased. The operation reliability is high, the maintenance cycle is more than doubled, and the service life is increased by 20%.

        A corrosive liquid capable of delivering chemical, neutral, corrosive, cold, or hot, clean or contaminated, suspended, or a large amount of crystalline particles.

UK GRIMM Imported axial flow pump structure characteristics:

 

          According to the lifting line theory, draw propeller design experience, the development of the design method of axial flow pump with variable circulation distribution along the radial direction, and the model test is carried out and compared with the same type of axial flow pump has the advantages of small size, light weight, good rigidity, high efficiency (compared with the British first generation Green chemical axial flow the pump efficiency is increased by more than 10%, weight more than 30%). As viewed from the drive side, the pump rotates counter clockwise.

 

UK GRIMM Imported axial flow pump design features:

 

           Imported axial flow pump adopts cantilever support type, single stage single suction axial flow impeller. The motor adopts straight belt or belt drive. The utility model adopts the structure of a back door, so that when the seal is repaired or replaced, only the rotating part can be drawn out, and the pipe is not needed to be disassembled, so the utility model has the advantages of convenient maintenance. Sealing type can use double end mechanical seal or packing seal. The pump body adopts a bent pipe type or a volute type structure, and the inlet and outlet of the pump have the same caliber. The bearing housing is provided with a water cooling cavity for cooling the bearing by cooling water. For the suspension structure or elastic foundation type axial flow pump for the special design. 

UK GRIMM Imported axial flow pump technical parameter:

 

 

 

 

 

Flow rate: 200 ~ 12000m3/h

Lift: 2 ~ 12m

Speed: 580 ~ 1450r/min

Power: 7.5 ~ 250KW

Caliber: 250 ~ 900mm

Design pressure: 0.4MPa

Working pressure: 1.0MPa

Operating temperature: -0 ~ 180 DEG C

 

UK GRIMM Imported axial flow pump seal up:

 

 

The radial vibration pendulum at the sealing cavity is less than 0.5mm, which ensures the reliability and durability of the seal and prolongs the maintenance period. Packing seals and single or double end mechanical seals can be installed, and power seals can be installed for special occasions.

Viton and other synthetic rubber are used in the fixed seal.

Fillers are made of asbestos, carbon fiber, flexible graphite and other corrosion-resistant materials.

 

UK GRIMM Imported axial flow pump texture of material:

 

           The flow components available 1Cr18Ni9, 1Cr18Ni12Mo2Ti, 1Cr18Ni12Mo3Ti, and other materials for colo 804 manufacturing. A variety of strong corrosion materials with a temperature of 0~180.

UK GRIMM Imported axial flow pump purpose:

        Imported axial flow pumps are mainly used in large flow and low lift occasions, especially for forced circulation processes with corrosive media. For example, the mandatory cycle of caustic soda and salt production is also applied to phosphate fertilizer, oil, chemical fiber, paper making, and other production sectors.

*主 題:
*公司名稱:
*聯 系 人:
 電 話: 兩種聯系方式
必須填寫一個
 電子郵件:
*反饋內容:
*驗 證 碼: 點擊刷新驗證碼
免責聲明:以上信息由企業自行提供,該企業負責信息內容的真實性、準確性和合法性。化工機械網對此不承擔任何保證責任。
關于我們 - 聯系我們 - 本站公告 - 服務條款 - 網站幫助 - 商務服務 - 法律聲明 - 法律顧問 - 友情鏈接 - 在線咨詢 - 網站地圖
全國客服熱線:400-667-8871
Copyright © 2004-2013 化工機械網 www.atcrlz.icu 江蘇東網信息科技有限公司 版權所有
  • 廣告業務(圖片廣告、會員申請):400-667-8871
  • 設備采購(設備采購、導購咨詢):400-667-8871
  • 信息編輯(會員審核、信息發布):400-667-8871
  • 媒體合作( 展會、協會、雜志 ):400-667-8871
  • 人力資源:400-667-8871
  • 圖文傳真:0519-89897519
蘇ICP備05005804號 增值電信業務經營許可證 蘇B2-20110228 E-mail:
http://www.atcrlz.icu/Sample/Pro3482531.html
上海快三二码遗漏